This O+ 8.96 Firmware Rom is Flash using CM2 Spreadtrum tool to same model.
The figure image on top picture shows the actual unit of O+ medel 8.96
after completely flash using said tool continue read below about what is ROM about
The firmware was already flash using CM2 tools using write firmware button.
Here some Logs may viewers will need to understand what ROM about
The firmware was already flash using CM2 tools using write firmware button.
Here some Logs may viewers will need to understand what ROM about
read info after repaired from infected virus.
Firmware i used you can download below
After flashing ! the device is set to automatic in reset condition,
All your user-data is lost.
Make sure back-up important data before to proceed flashing your phone.
ROM INFO after completely flash
Phone found! [ 61 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
- > Wait phone connected ...
Phone found! [ 61 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
Model Name : 8_96_AndroidModel Brand : 8_96_AndroidModel Device: 8_96_AndroidAndrVersion : 4.4.2BaseBand CPU: 8_96_ANDROIDProject Ver : 8_96_Android_SMART_V8_0_5Model Ext : 8_96_Android
Write Firmware Logs from CM2 window
Files set for flashing :
[ MCU ] : SC77xx Infinity Package
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable
==== Wait for phone...
Phone found! [ 61 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
PMTManager : Load 0x17 records
PMTManager : PMT Update Ok!
Flashing now
Update BootCode : u-boot-spl-16k.bin
Write Data ...
Write Data Ok!
Update BootCode : u-boot.bin
Erase block ...
Block erase Ok!
Write Data ...
Write Data Ok!
Write FSImage : prodnv.img
Write Data ...
Write Data Ok!
Write CodeData : sc7731g_CP0_modem.bin
Write Data ...
Write Data Ok!
Write CodeData : DSP_DM_Gx.bin
Write Data ...
Write Data Ok!
Erase Block : RuntimeData
Erase block ...
Block erase Ok!
Write CodeData : sc7731g_modem_CP2_WCN_14E_W15.17_Release.bin
Write Data ...
Write Data Ok!
Erase Block : RuntimeData
Erase block ...
Block erase Ok!
Write CodeData : logo_480x854.bin
Write Data ...
Write Data Ok!
Write CodeData : boot.img
Write Data ...
Write Data Ok!
Write FSImage : system.img
Write Data ...
Write Data Ok!
Write FSImage : cache.img
Write Data ...
FSImage : Make and Flush SPImage
Write Data Ok!
Write CodeData : recovery.img
Write Data ...
Write Data Ok!
Process : Flush
Flush Ok!
Write FSImage : userdata.img
Write Data ...
FSImage : Make and Flush SPImage
Write Data Ok!
Elapsed: 00:11:39
Reconnect Power/Cable!
O+ 8.96 smart V08 - Download this ROM for CM2
After flash complete power on the device and wait within 2-4 minutes on Logo until see the welcome menu.
Do it at your own risk,After flashing ! the device is set to automatic in reset condition,
All your user-data is lost.
Make sure back-up important data before to proceed flashing your phone.
Comments
Post a Comment