Lenovo A328 Firmware ROM

This Device screenshot above was revived from deadset unit by using the firmware that i find on net.
I used that file i download and here some firmware info using one of my Mediatek tools.

About Firmware info log and version is A328_ROW_S324_141116

Wait for phone...
Phone found! [ 96 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4834473164040501A2ADAAA11B
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d1G4
[eMMC] : FLASH_CID : 90014A4834473164040501A2ADAAA11B
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID : 0xDABB189F376283F221F07590C8E44BB4
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!
Brand : Lenovo
ProdName : Lenovo_A328
ProdModel : Lenovo A328
Device : A328
AndroidVer: 4.4.2
MTKxCPU : MT6582
MTKxPRJ : A328_ROW_S324_141116

The device is MTK chipset CPU and the file ROM is scatter can be use any supported MTK tools

Download firmware > rar no password

Download tools

Download driver

Firmware can use to same model/version about have problem about software related problem Hang, no power, password, pattern lock , infected by virus, anything about software related.
Best safe way is manual select flash only the SYSTEM ANDROID or use MOTA SIU LIKE of SP flash Tool to safe flash only.
Do it at your own risk, After flashing ! the device is set automatic in reset condition, All user data is lost.
Make sure back-up first before to proceed flashing your phone.