Samsung J700 A57 Firmware

Posted by
Firmware Information Backup
Device Brand   : alps
Device Model   : gxq6580_weg_l
Device CPU     : MT6580
Device IntName : full_gxq6580_weg_l
Device Version : Android 5.1
Device Compile : 6/2/2017 3:24:22 AM
Device Project : ALPS.L1.MP6.V2_GXQ6580.WEG.L_P69
Device ExtInfo : gxq6580_weg_l

Here some logs of the CM2 Mediatek Tools Backup.
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : FE014E50314A353541120518019231A5
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0xFE , OEM : 014E
[eMMC] : FLASH_INF : [MICRON] , A55J1
[eMMC] : FLASH_CID : FE014E50314A353541120518019231A5
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000001D3000000
[eMMC] : FLASH_UCP : 7472 MiB [eMMC 8 GiB]
DEV RID    : 0xDABB189FC3BB5FB39108ED278C5A3FEF
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Reading Flash Content now ...
xGPT : Normalize settings Ok!
Brand     : alps
ProdName  : full_gxq6580_weg_l
ProdModel : gxq6580_weg_l
Device    : gxq6580_weg_l
AndroidVer: 5.1
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2_GXQ6580.WEG.L_P69
[Read Ok] : preloader_gxq6580_weg_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[ScatCFG] : MT6580 / V1.1.2 / gxq6580_weg_l / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1317 MiB
Scatter saved to : MT6580__alps__gxq6580_weg_l__gxq6580_weg_l__5.1__ALPS.L1.MP6.V2_GXQ6580.WEG.L_P69

MT6580 ALPS.L1.MP6.V2 GXQ6580.WEG.L P69



The ROM is backup as scatter file can be flash back using any Mediatek tool if you don't have paid tool
can be flash back using any Mediatek tool that support scatter base loader.
ROM support scatter base file like SP flash Tool.

The Figure above is actual device and already reset the software to factory ROM.
And the Tools was readed the info name called is MT6580 ALPS.L1.MP6.V2 GXQ6580.WEG.L P69
Download Ready.

Comments

Post a Comment